ATragMX setup: rifle & bullet values

---

The FM outlines our core skills, policies and guides to ensure every member stands ready for the mission ahead.

The Range Card contains several details needed for accurate ATragMX setup.

Four details requiring entry use imperial units:

• Caliber (inches)
• Bullet Weight (grains)
• Scope Height (inches)
• Rifling Rate (inches per turn)

Press "E" on the top right corner of your AtragMX main screen to input these 4 imperial units.

One additional value is in metric units:

• Zero range (meters)

Press "M" on the top right corner of your AtragMX main screen to input metric units.

Above: Range Card values for entry into AtragMX

Published by Maj James on 05/07/2024 at 20:09

The Range Card contains several details needed for accurate ATragMX setup.

Four details requiring entry use imperial units:

• Caliber (inches)
• Bullet Weight (grains)
• Scope Height (inches)
• Rifling Rate (inches per turn)

Press "E" on the top right corner of your AtragMX main screen to input these 4 imperial units.

One additional value is in metric units:

• Zero range (meters)

Press "M" on the top right corner of your AtragMX main screen to input metric units.

Above: Range Card values for entry into AtragMX

Published by SFC mbaker5114 on 18/06/2024 at 03:14

On your Range Card, you’ll find the values for bore, barrel twist, bullet weight and bullet diameter as shown in Figure 1 below.

All these values are measured in imperial units, so make sure to press E on the top right corner of your AtragMX before inputting them.

For muzzle velocity, open AtragMX > Options > Muz Vel Table, copy the muzzle velocities at different temperatures from your range card as shown in Figure 2.

The AtragMX will now automatically interpolate the correct muzzle velocity whenever you change atmospheric temperature.

Above: Range Card values for entry into AtragMX

Published by SFC mbaker5114 on 17/06/2024 at 23:03

On your Range Card, you’ll find the values for bore, barrel twist, bullet weight and bullet diameter as shown in Figure 1 below.

All these values are measured in imperial units, so make sure to press E on the top right corner of your AtragMX before inputting them.

For muzzle velocity, open AtragMX > Options > Muz Vel Table, copy the muzzle velocities at different temperatures from your range card as shown in Figure 2.

The AtragMX will now automatically interpolate the correct muzzle velocity whenever you change atmospheric temperature.

Above: Range Card values for entry into AtragMX

Published by SFC mbaker5114 on 17/06/2024 at 21:25

On your Range Card, you’ll find the values for bore, barrel twist, bullet weight and bullet diameter as shown in Figure 1 below.

All these values are measured in imperial units, so make sure to press E on the top right corner of your AtragMX before inputting them.

For muzzle velocity, open AtragMX > Options > Muz Vel Table, copy the muzzle velocities at different temperatures from your range card as shown in Figure 2.

The AtragMX will now automatically interpolate the correct muzzle velocity whenever you change atmospheric temperature.

Above: Range Card values for entry into AtragMX

Published by 2Lt Aiedail on 16/05/2024 at 17:55

On your Range Card, you’ll find the values for bore, barrel twist, bullet weight and bullet diameter like in Figure 1.

All these values are measured in imperial units, so make sure to press E on the top right corner of your AtragMX before inputting them.

For muzzle velocity, open AtragMX > Options > Muz Vel Table, copy the muzzle velocities at different temperatures from your range card as shown in Figure 2.

The AtragMX will now automatically interpolate the correct muzzle velocity whenever you change atmospheric temperature.

Above: Range Card values for entry into AtragMX

Published by Sgt Jochem on 15/05/2024 at 17:53

On your Range Card, you’ll find the values for bore, barrel twist, bullet weight and bullet diameter like in Figure 1.

*Note that all these values are measured in imperial units, so make sure to press E on the top right corner of your AtragMX before inputting them.

For muzzle velocity, open AtragMX > Options > Muz Vel Table, copy the muzzle velocities at different temperatures from your range card as shown in Figure 2.

The AtragMX will now automatically interpolate the correct muzzle velocity whenever you change atmospheric temperature.

Above: Range Card values for entry into AtragMX

Published by SSG Mohawk on 01/05/2024 at 14:27