Use your Kestrel to find the current atmospheric temperature, pressure and humidity at your firing position.
- For this you have to open your Kestrel 4500 and go to Screen 2.
- Input the values shown in the AtragMX. (Figure 1)
- If you did everything correctly at the start of the game, you should now have the correct muzzle velocity.
Use your Kestrel to measure the wind.
- For this you have to open your Kestrel 4500 and go to Screen 1.
- Input the values shown in the AtragMX. (Figure 2)
Use your Range Finder to measure the current distance and inclination angle to your target and input the values shown into the AtragMX. (Figure 2)
If equipped with a Vector range finder, you can connect the AtragMX to the Vector and have the distance and inclination values automatically inserted into the AtragMX.
- Open ACE self-interact: select Configure DAGR > Connect > Vector.
- From then on, by holding Tab + R for one second centered on the target the values will be automatically sent ot the AtragMX.
Above: Kestrel and Rangefinder data entries in the AtragMX
